ELMER'S PRODUCTS INC -- PROBOND CONCRETE BONDER, E862  -- 8040-00N087986
<pre>=====================  Product Identification  =====================

Product ID:PROBOND CONCRETE BONDER, E862
MSDS Date:03/04/1998
FSC:8040
NIIN:00N087986
=== Responsible Party ===
Company Name:ELMER'S PRODUCTS INC
Address:1000 KINGSMILL PARKWAY
City:COLUMBUS
State:OH
ZIP:43229
Country:US
Info Phone Num:800-848-9400
Emergency Phone Num:800-228-5635
CAGE:JO705
=== Contractor Identification ===
Company Name:ELMER'S PRODUCTS INC
Address:1000 KINGSMILL PARKWAY
Box:City:COLUMBUS
State:OH
ZIP:43229
Country:US
Phone:800-848-9400/614-225-7689
CAGE:JO705

=============  Composition/Information on Ingredients  =============

Ingred Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION: NOT EXPECTED TO BE HARMFUL
    UNDER NORMAL CONDITIONS OF USE. INHALATION: NOT EXPECTED TO BE
    HARMFUL UNDER NORMAL CONDITIONS OF USE. HOWEVER, IF ALLOWED TO
    BECOME AIRBORNE, MAY CAUSE IRRITATIO N OF NOSE, THROAT AND LUNGS.
    SKIN: MAY CAUSE IRRITATION ON PROLONGED OR REPEATED CONTACT. EYES:
    MAY (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CAUSE IRRITATION ON PROLONGED OR
    REPEATED CONTACT. DELAYED HAZARDS: NONE OF THE COMPONENTS PRESENT
    IN THIS PRODUCT AT CONCENTRATIONS EQUAL TO OR GREATER THAN 0.1%
    HAVE BEEN LISTED BY NTP, CL ASSIFIED BY IARC NOR REGULATED BY OSHA
    AS A CARCINOGEN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST: IF ACCIDENTALLY SWALLOWED, DILUTE BY DRINKING LARGE
    QUANTITIES OF WATER. IMMEDIATELY CONTACT POISON CONTROL CENTER OR
    HOSPITAL EMERGENCY ROOM FOR ANY OTHER ADDITIONAL TREATMENT
    DIRECTIONS. INH AL: REMOVE TO FRESH AIR. SKIN: IN CASE OF
    IRRITATION, FLUSH WITH WATER. EYES: IMMEDIATELY FLUSH EYES WITH
    PLENTY OF WATER FOR AT LEAST 15 MINUTES. CALL MD IF IRRITATION
    PERSISTS.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . IN CASE OF FIRE, WATER SHOULD BE USED TO KEEP
    FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:WILL NOT BURN UNLESS WATER HAS
    EVAPORATED. DRIED MATERIAL MAY BURN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP WITH ABSORBENT MATERIAL AND REMOVE TO
    A CHEMICAL DISPOSAL AREA. PREVENT ENTRY INTO NATURAL BODIES OF
    WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. STORE IN A COOL,
    DRY PLACE. KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:HANDLE IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE &
    SAFETY PRACTICES. INHALATION: AVOID PRLNGD/RPTD BREATHING OF VAPOR.
    SKIN: AVOID PRLNGD/RPTD CONTACT WITH SKIN & CLOTHING. EYES: AVOID
    PRLNGD/RPTD CO NTACT WITH EYES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHERE AIR CONTAMINANTS CAN EXCEED ACCEPTABLE
    CRITERIA, USE NIOSH APPRVD RESP PROT EQUIP. RESPS SHOULD BE
    SELECTED BASED ON FORM & CONCENTRATION OF CONTAMINANTS IN AIR I/A/W
    OSHA LAWS & REGS OR OTHER A PPLIC STANDARDS OR GUIDELINES, (SUPDAT)
Ventilation:IF AIRBORNE CONTAMINANTS ARE GENERATED WHEN MATL IS HEATED
    OR HANDLED, SUFFICIENT VENT IN VOL & AIR FLOW (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
RESP PROT: INCLUDING ANSI STANDARDS REGARDING RESPIRATORY PROTECTION.
    VENT: PATTERNS SHOULD BE PROVIDED TO KEEP AIR CONTAMINANT
    CONCENTRATION LEVELS BELOW ACCEPTABLE CRITERIA.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17.5
Vapor Density:<1
Spec Gravity:1.1
pH:4.6
Evaporation Rate &amp; Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:DISPERSIBLE
Appearance and Odor:LIGHT GRAY LIQUID; MILD ACETIC AROMA.
Percent Volatiles by Volume:45.5

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALINE MATERIALS.
Stability Condition to Avoid:NORMALLY STABLE AS DEFINED IN NFPA
    704-12(4-3.1).
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:RECOVER FREE LIQUID. ABSORB RESIDUE AND DISPOSE
    OF ACCORDING TO LOCAL, STATE/PROVINCIAL AND FEDERAL REQUIREMENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.