=====================  Product Identification  =====================

Product ID:DISC BRAKE HIGH TEMP WHEEL BEARING GREASE, 3169
MSDS Date:03/01/1993
FSC:9150
NIIN:00N021764
MSDS Number: BYTVD
=== Responsible Party ===
Company Name:STA-LUBE INC
Address:3039 ANA ST
Box:5746
City:COMPTON
State:CA
ZIP:90224
Country:US
Info Phone Num:310-537-5650
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:33876
=== Contractor Identification ===
Company Name:STA-LUBE INC
Address:3039 ANA ST
Box:City:RANCHO DOMINGUEZ (PART OF COMPTON)
State:CA
ZIP:90221
Country:US
Phone:310-664-2121/800-424-9300(CHEMTREC)
CAGE:33876

=============  Composition/Information on Ingredients  =============

Ingred Name:OTHER PROT EQUIP: SPECIFIC FOR PETROLEUM-BASED MATERIALS
    MAY BE USED WHEN GLOVES ARE IMPRACTICAL.
RTECS #:9999999ZZ

Ingred Name:ING 14: COMMERCIALLY CLEANED. DO NOT CUT, WELD, DRILL OR
    EXPOSE TO HEAT OR FLAME. VAPORS MAY BE HAZARDOUS.
RTECS #:9999999ZZ

Ingred Name:MINERAL OIL, PETRO DISTILLATE, SOLVENT REFINED (SEVERE),
    HEAVY NAPHTHENIC; (SOLVENT REFINED HEAVY NAPHTHENIC DISTILLATE)
CAS:64741-96-4
RTECS #:PY8040001
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ALUMINUM SOAP COMPLEX
RTECS #:9999999ZZ
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ANTIMONY (SARA 313) (CERCLA); (ANTIMONY COMPOUND)
CAS:7440-36-0
RTECS #:CC4025000
Fraction by Wt: 1-2%
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG (SB)/M3
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:MOLYBDENUM; (MOLYBDENUM COMPOUND)
CAS:7439-98-7
RTECS #:QA4680000
OSHA PEL:10 PPM.
ACGIH TLV:10 PPM.

Ingred Name:GRAPHITE (NATURAL)
CAS:7782-42-5
RTECS #:MD9659600
OSHA PEL:15 MPPCF; Z-3
ACGIH TLV:2 MG/M3 RDUST

Ingred Name:VOLATILE ORGANIC CONTENT, MATERIAL:0. VOLATILE ORGANIC
    CONTENT, LESS WATER:0
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SUPDAT:WELL-VENTILATED AREA AWAY FROM HEAT, & STRONG
    OXIDIZING AGENTS. PROTECT CNTNRS FROM PHYSICAL DAMAGE.
RTECS #:9999999ZZ

Ingred Name:ING 7: INHAL:MOVE AWAY FROM SOURCE OF EXPOS TO MIST/FUMES &
    INTO FRESH AIR. IF SYMPS OF EXPOS DEVELOP, SEEK MED (ING 9)
RTECS #:9999999ZZ

Ingred Name:ING 8: ASSISTANCE. INGEST: IF CONSCIOUS & ALERT, GIVE MILK
    OR WATER TO DRINK. SEEK MED ASSISTANCE. COMMENTS/MD (ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9: INFO: THIS MATERIAL IS COMPLEX SOLID OR SEMI-SOLID
    MIXTURE W/LOW ORDER OF ACUTE TOXICITY.
RTECS #:9999999ZZ

Ingred Name:OTHER PRECS: UNATTENDED CNTNRS. NON-ROUTINE OPERATIONS:
    OPERATIONS SUCH AS MAINTENANCE, REPAIR, CLEAN-UP OR (ING 12)
RTECS #:9999999ZZ

Ingred Name:ING 11: SAMPLING INCREASE POTNTL FOR EXPOS TO THIS MATL.
    PERS INVOLVED IN THESE TYPES OF OPERATIONS SHOULD WEAR (ING 13)
RTECS #:9999999ZZ

Ingred Name:ING 12: PROT EQUIP & CLTHG & EXERCISE SPEC PRECS TO AVOID
    EXPOS. MISUSE OF EMPTY CNTNRS CAN BE HAZ. COMPLETELY (ING 14)
RTECS #:9999999ZZ

Ingred Name:ING 13: DRAIN & COMMERCIALLY CLEAN BEFORE REUSE. KEEP CLSD
    & DO NOT USE TO STORE/MIX OTHER MATLS BEFORE HAVING (ING 15)
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:GREASES ARE COMPLEX SOLID TO
    SEMI-SOLID PETRO/SYNTHETIC BASED MIXS. THESE MIXS CNTN THICKENING
    AGENTS & OTHER FUNCTIONAL ADDITIVES. THESE COMPONENTS ARE TIGHTLY
    BOUND IN GREASE MATRIX & DON'T USUALLY  PRESENT HLTH RISK UNDER
    NORM CNDTNS OF USE. GEN EFTS:PRLNGD CNTCT MAY IRRIT SKIN. EXPOS TO
    FUME MISTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: IF GENERATED MAY IRRIT EYES & UPPER
    RESP TRACT. EYES:MATL MAY CAUSE IRRIT. DIRECT CNTCT/EXPOS TO
    MISTS/FUMES WHICH MAY BE GENERATED AT HIGH TEMPS MAY CAUSE BURNING,
    TEARING & REDNESS. SKIN:M ATL MAY CAUSE IRRIT. PRLNGD/RPTD CNTCT
    MAY CAUSE BURNING, REDNESS & DERM. INHAL:EXPOS TO MISTS/FUMES
    GENERATED (SUPDAT)
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN CONDITIONS.
    PRE-EXISTING RESPIRATORY CONDITIONS IF MISTS OR FUMES ARE
    GENERATED.

=======================  First Aid Measures  =======================

First Aid:ATTN:IF VICTIM NOT BRTHG OR IF BRTHG DFCLTY DEVELOPS, ARTF
    RESP OR OXYGEN SHOULD BE ADMIN BY QUALIFIED PERS. EYES: FLUSH EYES
    W/WATER. IF IRRIT DEVELOPS, SEEK MED ASSISTANCE. SKIN: REMOVE
    CONTAMD CLTH G & WIPE MATL FROM SKIN. THORO WASH SKIN W/SOAP &
    WATER. USE WATERLESS SKIN CLEANSER IF NEC. IF IRRIT DEVELOPS &
    PERSISTS, SEEK MED ASSISTANCE. CERTAIN OPERATIONS INCR POTNTL FOR
    EXPOS TO THIS (ING 7)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>400F,>204C
Lower Limits:0.7%
Upper Limits:5.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, OR WATER SPRAY.
    WATER SPRAY OR FOAM MAY CAUSE FROTHING.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROTECT EQUIP .
    USE WATER SPRAY TO COOL FIRE-EXPOSED CNTNRS, DILUTE & DISPERSE
    VAPORS, PROTECT PERS, & TO FLUSH (SUPDAT)
Unusual Fire/Explosion Hazard:THIS MATL CAN IGNITE & BURN WHEN HEATED
    ABOVE ITS FLASH POINT. EMPTY TANKS/CNTNRS RETAIN MATL RESIDUE &
    MAY, IF HEATED, GENERATE VAPS WHICH CAN IGNITE (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR REC PROT CLTHG & EQUIP & PROVIDE ADEQ
    VENT. DO NOT ALLOW SPILLS TO ENTER SEWERS, STREAMS OR SURF WATERS.
    DIKE & CNTN SPILLS. PICK UP LG SPILLS FOR LATER RECLAMATION & DISP.
    USE INERT ABSORB TO PI CK UP RESIDUE/SM SPILLS & COLLECT FOR LATER
    DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN CLOSED CONTAINERS IN A COOL,
    DRY, WELL-VENTILATED AREA AWAY FROM HEAT & STRONG OXIDIZING AGENTS.
    PROTECT CNTNRS FROM PHYSICAL DAMAGE.
Other Precautions:USE IN WELL-VENT AREA & WEAR RECOM PROT CLTHG &
    EQUIP. AVOID BRTHG MISTS/FUMES GENERATED WHEN THIS MATL IS
    HEATED/BURNED. AVOID PRLNGD SKIN CNTCT. WASH THORO AFTER HNDLG.
    CLEAN/LAUNDER CONTAMD SHOES &  CLTHG BEFORE REUSE. LABEL ALL (ING
    11)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESP PROT MAY BE NEC TO MINIMIZE EXPOS TO
    MISTS/FUMES. WEAR A NIOSH/MSHA APPRVD PARTICULATE RESP IN
    SITUATIONS WHERE MIST CONCS MAY EXCEED RECOM EXPOS LIMITS. USE
    NIOSH/MSHA APPRVD SELF-CONTAINED SUPP LIED-AIR RESPS FOR
    EMERGENCIES.
Ventilation:GENERAL MECHANICAL VENTILATION OR LOCAL EXHAUST IS RECOM TO
    MAINTAIN MIST/FUME CONCENTRATIONS BELOW RECOM EXPOS LIMITS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . PROT
    GLOVES & CLTHG RECOM TO PVNT SKIN CNTCT. BARRIER CREAMS (ING 16)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: GREASE 3160-3169. FIRE FIGHT PROC: SPILLS
    AWAY FROM FIRE. EFTS OF OVEREXP: WHEN THIS MATL IS HEATED/BURNED
    MAY CAUSE IRRIT OF NOSE, THROAT & UPPER RESP TRACT. INGEST: ACCIDEN
    TALLY SWALLOWING MATL CAN CAUSE IRRIT OF STOM & INTESTINAL TRACT.
    CHRONIC: NONE KNOWN FOR THIS MATL OR ITS COMPONENTS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>600F,>316C
Vapor Pres:NEGLIGIBLE
Vapor Density:>THAN AIR
Spec Gravity:0.9-1.0
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK, SEMI-SOLID TO SOLID GREASE WITH A FAINT
    PETROLEUM ODOR.
Percent Volatiles by Volume:NEGLIG

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
INCOMPATIBLE WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:STABLE UNDER NORMAL CONDITIONS OF STORAGE
    AND HANDLING.
Hazardous Decomposition Products:BURNING PRODUCES CARBON DIOXIDE,
    CARBON MONOXIDE AND POSSIBLE TRACE AMOUNTS OF OXIDES OF SULFUR AND
    NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL REGULATIONS. EMPTY TANKS AND CONTAINERS SHOULD BE
    COMMERCIALLY CLEANED AND RECONDITIONED BEFORE REUSE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.