DAP, INC -- MITEE CLEAR THREAD CUTTING OIL  -- 9150-00F006720
<pre>=====================  Product Identification  =====================

Product ID:MITEE CLEAR THREAD CUTTING OIL
MSDS Date:01/01/1987
FSC:9150
NIIN:00F006720
=== Responsible Party ===
Company Name:DAP, INC/DAYTON, OH 45431
Emergency Phone Num:(513) 253-7154
CAGE:FO223
=== Contractor Identification ===
Company Name:DAP INC.
Box:277
City:DAYTON
State:OH
ZIP:45401-0277
Country:US
Phone:513-253-7154/800-543-3840
CAGE:90300
Company Name:DAP, INC/DAYTON, OH 45431
CAGE:FO223

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS:8012-95-1
RTECS #:PY8030000
Fraction by Wt: 100%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3/10 STEL;9192

Ingred Name:ADDITIVE PACKAGE CONTAINING SULFUR & CHLORIDE

=====================  Hazards Identification  =====================

Effects of Overexposure:BELIEVED TO BE MINIMALLY IRRITATING TO THE
    EYES, SKIN & RESPIRATORY SYSTEM.

=======================  First Aid Measures  =======================

First Aid:INHALATION/SKIN/INGESTION: NONE CONSIDERED NECESSARY. EYES:
    FLUSH WITH PLENTY OF WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:375F (COC)
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, ALCOHOL FOAM OR CO2.
Fire Fighting Procedures:WATER OR FOAM MAY CAUSE FROTHING; COOL EXPOSED
    CONTAINERS.
Unusual Fire/Explosion Hazard:NOT PERTINENT

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL. ABSORB WITH INERT POROUS
    MATERIAL. DISCARD IN ACCORDANCE WITH FEDERALSTATE AND LOCAL
    REGULATIONS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PERIODS OF EXPOSURE TO HIGH
    TEMPERATURES SHOULD BE MINIMIZED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:AS REQUIRED TO MAINTAIN AIR CONCENTRATIONS BELOW 5MG/CUM
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:GLOVES FOR PROLONGED OR REPEATED CONTACT.
Supplemental Safety and Health
MSDS DATE: 07/20/84. CONTAINS: MINERAL OIL, & ADDITIVE PACKAGE
    CONTAINING SULFUR AND CHLORINE.

==================  Physical/Chemical Properties  ==================

Vapor Pres:NIL
Spec Gravity:0.893
Evaporation Rate &amp; Reference:NOT PERTINENT
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TRANSLUCENT LIQUID
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT PERTINENT
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:CO, CO2, ALDEHYDES, KETONES, NOX,
    SULFUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:THIS PRODUCT IS NON-HAZARDOUS IN ITS PURCHASED
    FORM ACCORDING TO U.S. EPA'S HAZARDOUS WASTE MANAGEMENT
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.