=====================  Product Identification  =====================

Product ID:ELAST-A-BOND V/A COATING, E 400
MSDS Date:01/01/1989
FSC:8030
NIIN:00N017977
MSDS Number: BLZSB
=== Responsible Party ===
Company Name:EVR-GARD COATINGS CO
Address:16400 GARFIELD AVENUE
City:PARAMOUNT
State:CA
ZIP:90723
Country:US
Info Phone Num:213-531-0131
Emergency Phone Num:213-531-0131
CAGE:5G582
=== Contractor Identification ===
Company Name:EVR-GARD COATINGS CO
Address:16400 GARFIELD AVE
Box:City:PARAMOUNT
State:CA
ZIP:90723
Country:US
Phone:310-531-0131
CAGE:5G582

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE GLYCOL. VP: 0.1 @ 68F.
CAS:107-21-1
RTECS #:KW2975000
OSHA PEL:50 PPM, C
ACGIH TLV:50 PPM VAPOR/MIST, C
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:PROPIONIC ACID, 2-METHYL-, MONOESTER WITH
    2,2,4-TRIMETHYL-1,3-PENTANEDIOL; (TEXANOL)
CAS:25265-77-4
RTECS #:UF6000000

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL: MAY CAUSE HEADACHE AND NAUSEA,
    DIZZINESS. SKIN/EYES: PRIMARILY AN IRRITANT. REDNESS OR RASH ON
    SKIN. INGEST: NAUSEA, DIZZINESS, HEADACHES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED CONTACT WITH MATERIAL MAY
    CAUSE DERMATITIS.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE PATIENT TO FRESH AIR. EYES: FLUSH WITH CLEAN
    WATER FOR AT LEAST 15 MINUTES. SKIN: REMOVE SATURATED CLOTHING AND
    WASH SKIN WITH SOAPY WATER THOROUGHLY. INGEST: INDUCE VOMITING WITH
    1 OZ O F SYRUP OF IPECAC FOLLOWED IN 5 MINUTESWITH A GLASS OF
    WATER. CALL MD.

=====================  Fire Fighting Measures  =====================

Lower Limits:0.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:THIS IS A WATER-BASED PRODUCT. WILL NOT
    SUPPORT COMBUSTION. USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILL WITH ANY ABSORBENT
    MATERIAL--SAWDUST, SAND, CLAYS, ETC, AND FLUSH SPILL AREA WITH LOTS
    OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:THIS PRODUCT IS STABLE UNDER NORMAL
    USE AND STORAGE CONDITIONS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP FROM FREEZING. DO
    NOT TAKE INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:THE USE OF NIOSH/MSHA APPROVED MASKS DURING
    APPLICATION TO AVOID EXCESSIVE INHALATION OF VAPORS IS HIGHLY
    RECOMMENDED. OPEN WINDOWS AND DOORS OR USE OTHER MEANS TO INSURE
    FRESH AIR ENTRY DURING APPLIC ATION AND DRYING.
Ventilation:PROVIDE ADEQ VENT AT ALL TIMES DURING HNDLG & APPLIC OF
    THIS PROD. INSURE ADEQ SUPPLY OF FRESH AIR AT ALL TIMES.
Protective Gloves:BUNA N GLOVES, IF REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES 
Other Protective Equipment:MASKS, GLOVES AS NEEDED TO PREVENT PROLONGED
    CONTACT.
Work Hygienic Practices:OBSERVE STANDARD HYGIENIC PRACTICES WHEN
    HANDLING THIS PRODUCT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Pres:SEE ING 01
Vapor Density:>AIR
Spec Gravity:1.4
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:THICK LIQUID, WHITE AND COLORS, SLIGHT AMMONIA
    SMELL.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALIS AND MATERIALS THAT REACT WITH WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURE AREAS.
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE ALL HAZARDOUS WASTES, INCLUDING ABSORBENTS
    USED FOR SPILLS, IN 55 GAL METAL DRUMS AND DISPOSE IN APPROVED
    DUMPSITE IN ACCORDANCE WITH PRESCRIBED FEDERAL, STATE AND LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.