CUSTOM BUILDING PRODUCTS INC -- CONCRETE PLASTER ADHESIVE, CPA  -- 8040-00N043528
<pre>=====================  Product Identification  =====================

Product ID:CONCRETE PLASTER ADHESIVE, CPA
MSDS Date:02/24/1987
FSC:8040
NIIN:00N043528
=== Responsible Party ===
Company Name:CUSTOM BUILDING PRODUCTS INC
Address:6511 SALT LAKE AVE
City:BELL
State:CA
ZIP:90201
Country:US
Info Phone Num:213-582-0846
Emergency Phone Num:213-582-0846
Preparer's Name:TERI JAMESON
CAGE:CUSTO
=== Contractor Identification ===
Company Name:CUSTOM BUILDING PRODUCTS
Address:6511 SALT LAKE AVE.
City:BELL
State:CA
ZIP:90201
Country:US
Phone:213-582-0846
CAGE:CUSTO

=============  Composition/Information on Ingredients  =============

Ingred Name:NON HAZARDOUS INGREDIENTS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: NONE. INHAL/SKIN/SKIN
    ABSORB/ INGEST: NONE. EYES: MAY CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE EXPECTED.

=======================  First Aid Measures  =======================

First Aid:EYE: IMMEDIATELY FLUSH WITH POTABLE WATER FOR A MINIMUM OF 15
    MIN. SEEK ASSISTANCE FROM MD . SKIN: FLUSH WITH COPIOUS AMOUNTS OF
    WATER. CALL MD . INHAL: REMOVE TO FRESH AIR. SUPPORT BREATH ING
    (GIVE O2/ARTF RESP) . INGEST:GET MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Extinguishing Media:NONE KNOWN. EXTINGUISHING MEDIA SUITABLE FOR
    SURROUNDING FIRE 
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH HEAVILY WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE ABOVE 40F. DO NOT FREEZE.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APVD CHEMICAL SAFETY GOGGLES 
Other Protective Equipment:ANSI APPROVED EYE BATH AND SAFETY SHOWER.
Work Hygienic Practices:GENERAL HOUSEKEEPING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Density:HVR/AIR
Spec Gravity:1.1 (H2O=1)
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:MILKY, VISCOUS LIQUID, CHARACTERISTIC ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
    CARBON MONOXIDE AND/OR CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURN IN A LANDFILL. DISPOSAL MUST BE IN
    ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.